郭振华, 陈星明, 黄春明. 平宝公司水力冲孔工艺系统及技术参数考察[J]. 煤矿安全, 2013, 44(9): 8-10.
    引用本文: 郭振华, 陈星明, 黄春明. 平宝公司水力冲孔工艺系统及技术参数考察[J]. 煤矿安全, 2013, 44(9): 8-10.
    GUO Zhen-hua, CHEN Xing-ming, HUANG Chun-ming. Hydraulic Flushing Process System and Its Parameters Investigation in Pingbao Company[J]. Safety in Coal Mines, 2013, 44(9): 8-10.
    Citation: GUO Zhen-hua, CHEN Xing-ming, HUANG Chun-ming. Hydraulic Flushing Process System and Its Parameters Investigation in Pingbao Company[J]. Safety in Coal Mines, 2013, 44(9): 8-10.

    平宝公司水力冲孔工艺系统及技术参数考察

    Hydraulic Flushing Process System and Its Parameters Investigation in Pingbao Company

    • 摘要: 针对平宝公司二1-2 厚煤层高瓦斯压力、高瓦斯含量、煤体松软、透气性差、喷孔严重、穿层钻孔抽放瓦斯效果不理想的情况,在理论分析的基础上,经过现场水力冲孔试验,考察出了适合该矿井的水力冲孔工艺流程及技术参数。

       

      Abstract: Aiming at the situations of high gas pressure and content, soft coal body, low permeability as well as serious borehole outburst and nonideal gas drainage effect in cross-seam drillings of Pingbao Company Ⅱ1-2coal seam, the paper has been investigated suitable technological process and parameters for this mine based on theory analysis, on-site experiment of hydraulic flushing in borehole.

       

    /

    返回文章
    返回