李政, 康官先, 黄志明, 康天合. 近距离煤层同采工作面顺槽合理位置的模拟研究[J]. 煤矿安全, 2014, 45(7): 20-22.
    引用本文: 李政, 康官先, 黄志明, 康天合. 近距离煤层同采工作面顺槽合理位置的模拟研究[J]. 煤矿安全, 2014, 45(7): 20-22.
    LI Zheng, KANG Guanxian, HUANG Zhiming, KANG Tianhe. Simulation Study on Crossheading Reasonable Location of Close Distance Coal Seams Simultaneous Mining Working Face[J]. Safety in Coal Mines, 2014, 45(7): 20-22.
    Citation: LI Zheng, KANG Guanxian, HUANG Zhiming, KANG Tianhe. Simulation Study on Crossheading Reasonable Location of Close Distance Coal Seams Simultaneous Mining Working Face[J]. Safety in Coal Mines, 2014, 45(7): 20-22.

    近距离煤层同采工作面顺槽合理位置的模拟研究

    Simulation Study on Crossheading Reasonable Location of Close Distance Coal Seams Simultaneous Mining Working Face

    • 摘要: 通过数值模拟对华苑煤业9#、10#近距离煤层上部煤层回采形成的侧向支承应力在底板煤岩层中的传递与分布规律及其对下部煤层应力分布的影响进行了研究。研究结果表明,下部煤层工作面顺槽为内错布置时,应布置在距上部煤层侧向煤壁水平距离25 m以外;下部煤层工作面顺槽为外错布置时,应布置在距上部煤层侧向煤壁水平距离15 m以外。

       

      Abstract: Numerical simulation is used to study the transmission and distribution laws of lateral stress in floor seam and its impact on stress distribution of lower seams, and the lateral stress formed in upper coal seam of Huayuan Coal Industry 9# and 10# close distance coal seams, the results show that it should be arranged in the horizontal distance from the upper coal seam lateral wall more than 25 m when the lower coal seam mining face gateway is inner crossing layout;when the lower coal seam mining face gateway is outward staggered arrangement, it should be arranged in horizontal distance from the upper coal seam lateral wall more than 15 m.

       

    /

    返回文章
    返回