薛明理, 贾天让. "三软"煤层不同孔径顺层钻孔瓦斯抽采参数特征分析[J]. 煤矿安全, 2014, 45(9): 162-164.
    引用本文: 薛明理, 贾天让. "三软"煤层不同孔径顺层钻孔瓦斯抽采参数特征分析[J]. 煤矿安全, 2014, 45(9): 162-164.
    XUE Mingli, JIA Tianrang. Gas Extration Parameter Characteristics for Different Apertures Borehole Drilled Along Three-soft Seam[J]. Safety in Coal Mines, 2014, 45(9): 162-164.
    Citation: XUE Mingli, JIA Tianrang. Gas Extration Parameter Characteristics for Different Apertures Borehole Drilled Along Three-soft Seam[J]. Safety in Coal Mines, 2014, 45(9): 162-164.

    "三软"煤层不同孔径顺层钻孔瓦斯抽采参数特征分析

    Gas Extration Parameter Characteristics for Different Apertures Borehole Drilled Along Three-soft Seam

    • 摘要: 为提高“三软”煤层瓦斯抽采效果,考察了郑煤超化矿多组不同孔径顺层钻孔的瓦斯参数,运用瓦斯流动理论及岩土力学相关理论综合分析了其参数特征。结果表明:在“三软”煤层持续高负压抽采条件下,不同孔径的顺层钻孔的瓦斯流量及浓度都依次经历了快速衰减、不稳定波动、极限抽采3个阶段,在快速衰减阶段,φ94、φ89 mm钻孔在瓦斯浓度和瓦斯流量均远大于φ75 mm钻孔,而衰减梯度明显小于φ75 mm钻孔;在不稳定波动阶段,φ94、φ89、φ75 mm钻孔波动频率及幅度依次增加,周期依次减少;极限抽采阶段差异不大。结合现场施工条件,最终选择φ94 mm钻孔作为“三软”煤层顺层钻孔抽采的方案。

       

      Abstract: In order to improve gas extraction in three soft seam, parameter characteristics of different apertures boreholes drilled along seam in Chaohua Coal Mine were measured and studied with the theory of gas flow and rock and soil mechanics.This study shows that gas flow and concentration experienced 3 phases in turn, namely the rapid decline phase, unstable increase and decrease phase and limit phase. In the rapid decline phase, both gas concentration and gas flow in the φ94 mm and φ89 mm boreholes are much more than the φ75 mm boreholes, and the attenuation gradient is significantly less then the other. In the unstable increase and decrease phase, the vibration frequency and amplitude of fluctuation increase by degrees from the biggest borehole to smallest, and the wave period decrease is just opposite. While, there's very little difference from the parameter characteristics in the limit phase. Combined with the construction site conditions, the φ94 mm borehole was selected as the optimal one to extract gas in three soft seams.

       

    /

    返回文章
    返回