陈建忠, 代志旭. 瓦斯抽采钻孔合理封孔长度确定方法[J]. 煤矿安全, 2012, 43(8): 8-10.
    引用本文: 陈建忠, 代志旭. 瓦斯抽采钻孔合理封孔长度确定方法[J]. 煤矿安全, 2012, 43(8): 8-10.
    Chen Jian-zhong, DAI Zhi-xu. The Method of Determining Reasonable Sealing Length of Gas Extraction Borehole[J]. Safety in Coal Mines, 2012, 43(8): 8-10.
    Citation: Chen Jian-zhong, DAI Zhi-xu. The Method of Determining Reasonable Sealing Length of Gas Extraction Borehole[J]. Safety in Coal Mines, 2012, 43(8): 8-10.

    瓦斯抽采钻孔合理封孔长度确定方法

    The Method of Determining Reasonable Sealing Length of Gas Extraction Borehole

    • 摘要: 为确定十二矿顺层抽采钻孔的合理封孔长度,提高抽采效果,分析了封孔长度与巷道应力"三带"的关系,采用数值模拟和现场实测的方法确定了巷道应力"三带"的分布特征:卸压带范围为煤壁向里0~4 m,应力集中带范围为煤壁向里4~10 m,原始应力带范围为煤壁向里10 m以深,从而确定了合理封孔长度为10 m,并通过现场考察,验证了封孔长度为10 m是合理的。

       

      Abstract: In order to determine the reasonable sealing length of bedding extraction borehole in No.12 coal mine,and to improve the extraction effect,the relationship between the sealing length and "three zones" of stress is analyzed in this paper.The distribution characteristics of roadway stress "three zones" are determined by numerical simulation and field measurement method.The range of pressure released zone is from the coal wall to the inside 0~4 m;the range of stress concentration belt is from coal wall to the inside 4~10 m;and the range of original stress belt is from coal wall to the inside 10 m deep,which determines a reasonable sealing length of 10 m.Through on-site test inspection,it is verified that the sealing length of 10 m is reasonable.

       

    /

    返回文章
    返回