孙珍平. 基于邻空巷钻孔技术的特厚煤层均压工作面采空区自燃“三带”研究[J]. 煤矿安全, 2019, 50(12): 140-143.
    引用本文: 孙珍平. 基于邻空巷钻孔技术的特厚煤层均压工作面采空区自燃“三带”研究[J]. 煤矿安全, 2019, 50(12): 140-143.
    SUN Zhenping. Study on Spontaneous Combustion “Three Zones” in Gob Area of Pressure Equalizing Working face in Super Thick Coal Seam Based on Drilling Technology[J]. Safety in Coal Mines, 2019, 50(12): 140-143.
    Citation: SUN Zhenping. Study on Spontaneous Combustion “Three Zones” in Gob Area of Pressure Equalizing Working face in Super Thick Coal Seam Based on Drilling Technology[J]. Safety in Coal Mines, 2019, 50(12): 140-143.

    基于邻空巷钻孔技术的特厚煤层均压工作面采空区自燃“三带”研究

    Study on Spontaneous Combustion “Three Zones” in Gob Area of Pressure Equalizing Working face in Super Thick Coal Seam Based on Drilling Technology

    • 摘要: 为了解决特厚自燃煤层均压工作面采空区自燃“三带”测试的难题,以同忻矿8207工作面采空区为研究背景,采用在邻空巷道向邻近采空区施工钻孔,通过在钻孔不同深度中气体取样化验分析的方法,得出氧化带宽度在30~184 m范围内,并对比分析了均压通风(8207工作面)与负压通风(8100面)条件下采空区“三带”测试结果。研究表明:8207面均压后采空区“三带”明显“漂移”,氧化带宽度“拓宽”。对8207综放工作面采空区注氮布距进行了优化,有效治理了8207工作面回采期间采空区发火隐患。

       

      Abstract: To solve the problem of “three zones” test of spontaneous combustion in goaf of super-thick spontaneous combustion coal seam, this paper takes the goaf of 8207 working face in Tongxin Coal Mine as the research background, uses borehole construction in the roadway adjacent to the goaf, and obtains oxidation band width within the range of 30 m to 184 m by means of gas sampling analysis in different depths of borehole. The results of “three zones” test of goaf under the conditions of uniform pressure ventilation (8207 face) and negative pressure ventilation (8100 face) are compared and analyzed. The results show that “three zones” in goaf are obviously “drifting” and the width of oxidation zone is “widened” after pressure equalization on 8207 surface. The distribution distance of goaf in 8207 fully mechanized top coal caving face is optimized, and the hidden danger of goaf ignition during the stoping of 8207 face is effectively controlled.

       

    /

    返回文章
    返回