孟祥军, 林海飞, 王超, 赵鹏翔, 王绪友, 宁廷州, 邱春亮, 安学东, 杨俊生, 孙红星. 巨厚煤层综放工作面覆岩“三带”演化特征[J]. 煤矿安全, 2021, 52(6): 85-90.
    引用本文: 孟祥军, 林海飞, 王超, 赵鹏翔, 王绪友, 宁廷州, 邱春亮, 安学东, 杨俊生, 孙红星. 巨厚煤层综放工作面覆岩“三带”演化特征[J]. 煤矿安全, 2021, 52(6): 85-90.
    MENG Xiangjun, LIN Haifei, WANG Chao, ZHAO Pengxiang, WANG Xuyou, NING Tingzhou, QIU Chunliang, AN Xuedong, YANG Junsheng, SUN Hongxing. Evolution characteristics of overburden three zones in fully-mechanized caving face in huge thick coal seam[J]. Safety in Coal Mines, 2021, 52(6): 85-90.
    Citation: MENG Xiangjun, LIN Haifei, WANG Chao, ZHAO Pengxiang, WANG Xuyou, NING Tingzhou, QIU Chunliang, AN Xuedong, YANG Junsheng, SUN Hongxing. Evolution characteristics of overburden three zones in fully-mechanized caving face in huge thick coal seam[J]. Safety in Coal Mines, 2021, 52(6): 85-90.

    巨厚煤层综放工作面覆岩“三带”演化特征

    Evolution characteristics of overburden three zones in fully-mechanized caving face in huge thick coal seam

    • 摘要: 为了探究巨厚煤层回采过程中上覆岩层跨落演化规律,开展大采高覆岩三带分布特征试验研究;以硫磺沟巨厚煤层的地质条件和回采方式为背景,开展巨厚煤层条件下的二维物理相似模拟实验。结果表明:硫磺沟(9-15)06工作面巨厚煤层覆岩垮落带高度60 m;采空区覆岩水平裂隙密度随推进距离增加整体呈抛物线分布;采空区离层量受“横三区”岩层分布影响呈现“两侧高中间低”特点。通过计算采动覆岩下沉量、裂隙密度、离层量等物理量,推导出适合巨厚煤层条件下的覆岩“三带”高度确定公式。

       

      Abstract: To explore the evolution law of overburden strata during the mining of huge thick coal seams, an experimental study on the distribution characteristics of the overburden three zones with large mining height was carried out. Based on the geological conditions and mining methods of the huge thick coal seam, a two-dimensional physical similarity simulation experiment under the condition of huge thick coal seam was carried out. The results showed that the height of the overburden strata of the huge thick coal seam in Liuhuanggou(9-15) 06 working face was 60 m. The horizontal fracture density of the overburden strata in the gob was distributed as a parabola as the propulsion distance increased. Affected by the distribution of strata in the “horizontal three zones”, Delamination of goaf was characterized by “high on both sides and low in the middle”. By calculating physical quantities such as mining overburden subsidence, fissure density, and layer separation and other physical quantities, the formula for determining the height of overburden “three zones” under huge thick coal seams was derived.

       

    /

    返回文章
    返回