张子军,李 正. 浅埋深煤层工作面采空区自燃危险区判定及防治技术[J]. 煤矿安全, 2023, 54(8): 52-57.
    引用本文: 张子军,李 正. 浅埋深煤层工作面采空区自燃危险区判定及防治技术[J]. 煤矿安全, 2023, 54(8): 52-57.
    ZHANG Zijun. Determination and prevention technology of spontaneous combustion danger zone in shallow and deep coal seam[J]. Safety in Coal Mines, 2023, 54(8): 52-57.
    Citation: ZHANG Zijun. Determination and prevention technology of spontaneous combustion danger zone in shallow and deep coal seam[J]. Safety in Coal Mines, 2023, 54(8): 52-57.

    浅埋深煤层工作面采空区自燃危险区判定及防治技术

    Determination and prevention technology of spontaneous combustion danger zone in shallow and deep coal seam

    • 摘要: 浅埋深煤层工作面在开采过程中受采动影响更易产生与地面连通的裂隙,从而导致采空区漏风供氧增加、遗煤自然发火隐患增大。为尝试解决这一问题,以李家塔煤矿2号煤层首采1201工作面为研究对象,现场实测了工作面通风参数、采空区内进、回风两侧氧气体积分数的变化规律;CFD仿真模拟了不同供风量下采空区内部自燃危险区域的分布特征;并在此基础上提出了氧化区惰化降温、漏风区域控风堵漏、覆盖遗煤阻隔煤氧化反应“三位一体”的采空区遗煤自燃综合防灭火技术措施。结果表明:1201工作面采空区自燃危险分布范围为:进风侧86~222 m,回风侧54~156 m。

       

      Abstract: In the mining process, the shallow buried deep coal seam working face is more likely to produce cracks connected with the ground due to the influence of mining, which leads to the increase of air leakage and oxygen supply in goaf and the increase of hidden dangers of spontaneous combustion of residual coal. In order to try to solve this problem, taking 1201 of the first mining face of No.2 coal seam in Lijiata Coal Mine as the research object, the ventilation parameters of the working face and the change law of oxygen volume fraction on both sides of inlet and return air in goaf were measured in site; CFD simulation simulates the distribution characteristics of hazard areas in goaf under different air supply rates. On this basis, the trinity comprehensive fire prevention and extinguishing technical measures of spontaneous combustion of residual coal in goaf are proposed, which are “inert cooling in oxidation zone, wind control and plugging in air leakage zone, covering residual coal and blocking coal oxidation reaction”. The results show that the distribution range of spontaneous combustion danger in goaf of 1201 working face is 86-222 m on the air inlet side and 54-156 m on the air return side.

       

    /

    返回文章
    返回